Researchers at Sungkyunkwan University achieved full electrical and optical control of infrared wavelength and polarization by twisting anisotropic 2D semiconductors, overcoming discrete-angle and unpolarized emission limits in common 2H-phase transition-metal dichalcogenides.
Researchers at Sungkyunkwan University have demonstrated full electrical and optical control of infrared light by twisting atomically thin layers of rhenium disulfide and rhenium diselenide, overcoming a long-standing symmetry limit in two-dimensional semiconductors, the university announced Wednesday.
The breakthrough, published in ACS Nano, allows wavelength and polarization to be tuned simultaneously across a 100-meV range at virtually any twist angle from 1° to 88°, a capability that conventional isotropic materials restrict to high-symmetry angles near 0° and 60°.
“For the first time in the world, we have demonstrated a technology that can simultaneously control the wavelength and polarization of infrared light based on interlayer excitons simply by twisting atomically thin semiconductor layers,” said Prof. Jeongyong Kim of the Department of Energy Science at Sungkyunkwan University (SKKU), who led the study.
Interlayer excitons — bound electron–hole pairs that span two stacked monolayers — live tens of times longer than their intralayer counterparts and respond readily to external voltage, making them prime candidates for ultra-low-power optoelectronics and quantum computing. Until now, their emission in common 2H-phase transition-metal dichalcogenides appeared only at discrete angles and without polarization, limiting device design.
The SKKU team, with co-corresponding author Prof. Heesuk Rho of Jeonbuk National University, turned to 1T′-phase ReS₂ and ReSe₂, anisotropic semiconductors whose optical response varies with crystal orientation. Twisting the layers creates a moiré superlattice that hybridizes electronic states across the full angular range, producing stable, polarized infrared emission near 1.2 eV, Nanowerk reported.
First-principles calculations and low-frequency Raman spectroscopy confirmed that the moiré potential renormalizes the bands and modulates interlayer coupling, yielding a non-monotonic twist-angle dependence of the lowest-energy transition spanning ~60 meV. Adding layers and varying excitation energy extended total tunability to ~100 meV while boosting brightness up to an order of magnitude, according to the paper.
“By overcoming the limitations of existing 2D materials, this technology establishes a new materials platform for polarization-addressable infrared emitters and angle-sensitive photodetectors,” Kim said. He cited LiDAR for autonomous vehicles, night-vision imaging, and biosensors as near-term targets.
The work was supported by the National Research Foundation of Korea and the U.S. National Science Foundation.
Why anisotropy changes the game
Isotropic 2H-phase TMDs such as MoS₂ and WSe₂ lock bright interlayer exciton emission to stacking configurations where the valleys of the two layers align — essentially 0° (R-type) and 60° (H-type) twists. At all other angles the interlayer hybridization vanishes, killing the optical signal.
ReS₂ and ReSe₂ belong to the 1T′ structural family, which lacks three-fold rotational symmetry. Their in-plane anisotropy means the electronic bands — and therefore the interlayer coupling — vary continuously with twist angle. The moiré pattern formed by the lattice mismatch acts as a tunable potential map that remains optically active across the entire 1°–88° window, the study showed.
Experimental roadmap
- Heterobilayer assembly: Monolayer ReS₂ and ReSe₂ were stacked with controlled twist angles using a dry-transfer technique inside a glovebox.
- Optical characterization: Micro-photoluminescence and polarization-resolved spectroscopy mapped emission energy, intensity, and polarization axis versus twist angle.
- Layer-number scaling: Adding ReS₂ layers increased oscillator strength, raising emission intensity up to tenfold while preserving polarization control.
- Theory cross-check: Density-functional theory and GW-BSE calculations reproduced the non-monotonic energy dispersion and identified the moiré mini-bands responsible.
Implications for infrared photonics
Current mid-infrared sources — quantum-cascade lasers, black-body emitters, and III-V epitaxial LEDs — are either bulky, require cryogenic cooling, or lack electrical tunability. A van der Waals platform that delivers wavelength-agile, polarized output at room temperature could shrink LiDAR transceivers, enable chip-scale gas spectroscopy, and provide quantum-light sources for secure communications.
The SKKU group is now exploring electrical gating of the heterobilayers to demonstrate voltage-controlled switching, a step toward integrated photonic circuits.
FAQ
What is an interlayer exciton?
An interlayer exciton is a bound pair of an electron in one monolayer and a hole in the adjacent monolayer. Because the charges are spatially separated, these excitons have long lifetimes — tens of times longer than conventional excitons — and a permanent dipole moment that lets them be steered by electric fields.
Why do twist angles matter?
Twisting two atomic lattices creates a moiré superlattice whose periodicity depends on the angle. That superlattice reshapes the electronic bands and controls how strongly the layers couple, which in turn sets the emission energy and polarization of the interlayer exciton.
How wide is the tuning range?
The lowest-energy transition shifts by ~60 meV purely from twist-angle variation (1°–88°). Including multilayer stacking and excitation-energy changes extends the total accessible range to ~100 meV, the largest reported for 2D interlayer excitons.
Prof. Heesuk Rho of Jeonbuk National University, one of ten Flagship Korean National Universities founded in 1947 and located in Jeonju, served as a co-corresponding author on the study. The university operates 16 colleges and 14 graduate schools, enrolling approximately 32,000 students with 2,000 faculty and staff members.
When could this reach commercial devices?
The work is at the materials-demonstration stage. The team’s next step is electrical gating for active switching; device integration and wafer-scale growth would follow, likely a multi-year effort before commercial LiDAR or biosensor modules appear.
Related reading